Comtec FT213 Manuel d'utilisateur télécharger pdf (Page 3)

CONFIGURATION OVERVIEW

FUNCTION DESCRIPTION

Spectrum Analyzer,

100 kHz to 4/6 GHz

Locates and identifies various signals over a wide frequency range.

Detects signals as low as -152 dBm with phase noise better than -100 dBc/Hz.

Interference Analyzer

(Option 25)

Includes everything you need to monitor, identify, and locate interference using the spectrogram

display, RSSI, Signal ID, signal strength meter, and interference mapping.

Coverage Mapping (Option 431)

Provides indoor and outdoor mapping capabilities of RSSI, and ACPR measurement levels.

GPS Receiver (Option 31)

Provides location and UTC time information. Also improves the accuracy of the reference oscillator.

2-port Transmission Measurement

(Option 21)

Offers high and low power settings for both active and passive measurements.

Better than 80 dB dynamic range.

Bias Tee (Option 10)

Possesses a built-in 32 V bias tee that can be turned on as needed and applied to the RF In port.

High Accuracy Power Meter

(Option 19)

Connects high accuracy 4, 6, 8, 18, and 26 GHz USB power sensors with better than

± 0.16 dB accuracy.

Power Meter (Option 29)

Makes channelized transmitter power measurements.

Channel Scanner (Option 27)

Measures the power of multiple transmitted signals. Scans up to 1200 channels using Script Master.

CW Signal Generator (Option 28)

Provides CW source to test low noise amplifiers and repeaters. (Needs external CW generator kit.)

Gated Sweep (Option 90)

Views pulsed or burst signals such as WiMAX, GSM, and TD-SCDMA only when they are on.

AM/FM/PM Analyzer

(Option 509)

Analyzes AM/FM/PM signals and measures FM/PM deviation, AM depth, SINAD,

Total Harmonic Distortion and much more.

PIM Analyzer

(Option 419)

The PIM Analyzer measures the 3

, 5

, or 7

order intermodulation products in the receive band

of two high power tones generated by the 40 Watt PIM Master.

10 MHz Bandwidth Demod

(Option 9)

The 10 MHz BW demod option enables users to turn the Spectrum Master in to a Signal Analyzer.

GSM/GPRS/EDGE Measurements

(Option 40, 41)

RF and Demod Measurements enables end users to increase data rate and capacity by ensuring

good signal quality.

W-CDMA/HSDPA Measurements

(Option 44, 45, 65, 35)

Uses Spectrum Master’s RF, Demod, and OTA Measurements to verify frequency error, multipath

signals, EVM and much more.

LTE (Option 541, 542, 546)

Spectrum Master’s LTE Measurements enables users to make RF, Demod, and OTA Measurements.

Verify ACLR, Cell ID, Frequency Error, EVM, and much more.

TD-SCDMA/HSDPA Measurements

(Option 60, 61, 38)

The TD-SCDMA/HSDPA analyzer includes RF, Demod, and OTA measurements and the ability to

measure EVM and Peak CDE. It also includes an OTA Tau scanner.

cdmaOne/CDMA2000 1X

(Option 42, 43, 33)

RF, Demodulation, and OTA Measurements. Measures EVM, Noise floor, ACPR and much more.

Fixed and Mobile WiMAX

(Option 46, 47, 66, 67, 37)

RF Demod, and OTA Measurements verify Cell ID, Sector ID, Preamble, EVM, RCE, and much more.

ISDB-T

(Option 30, 32)

Makes RF and Demod Measurements to verify Spectrum Mask and MER.

Ensures digital TV transmitters are configured according to license agreements.

Ethernet Connectivity

(Option 411)

Provides the ability to operate automated testing from remote PC, or conversely, to upload data from

field test to the PC. Remote access control is also provided through Master Software Tools.

P25 Analyzer and Coverage

(Option 520, 522)

Provides technicians with RF, Demodulation, OTA, and mapping capabilities to assure

proper performance of a P25 transmitter.

NXDN Analyzer and Coverage

(Option 530, 532)

Provides technicians with RF, Demodulation, OTA, and mapping capabilities to assure

proper performance of a NXDN transmitter.

Integrated Measurement Capabilities

1 2 3 4 5 6 7 8 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Comtec FT213 Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Mesure, test et contrôle Comtec FT213